Oil Rust Degreasing Industrial Ultrasonic Cleaner Tank For Engine
Block Hardware Parts
Customize a suitable machine for yourself
We have many customers with there different need of the machine, so
cutomize the functions are very important.
The functions we provide normally.
1. Filter System: The most popular function for the heavy oil
cleaning, like the engine/ carburetor/ heating exchanger.
With a smaller filter tank and filter bag to keep the water or
detergent in ultrasonic tank clean.
Bubbling System: Usually use with the filter, some heavy sediment
like scrap iron, bits of woods can not flow into the filter tank,
so we need blow them onto the top of water and filtrate them.
Pump and Filtration Systems
A pump and filter system can be installed to maintain the
cleanliness level of the cleaning fluid, thus saving costs in water
usage, detergent dosing and heating.
Benefits of ultrasonics for filters:
Cleans delicate parts without damage
Cleans cracks and crevices that would be difficult to reach with
Does not require line-of-sight for effective cleaning
Doesn’t use harsh chemical solvents that are dangerous for workers
and the environment
Safe for aluminum, magnesium and zinc
Clean multiple pieces at once without having to brush by hand –
saves time and money
The efficiency of the transducer used in your ultrasonic cleaning
tank will affect both the cleaning time and efficiency achieved
during the cycle. A poor quality transducer will use more power and
take longer to clean items than an advanced transducer.
Ultrawave have invested a significant amount of time and money into
the design and development of our transducers, providing you with
superior cavitation performance.
The level of ultrasonic power is commonly referred to in ultrasonic
Watts per litre capacity. For example a 30 litre tank with 600W of
ultrasonics will give 20W/litre.
In general, the level of ultrasonic power should not be less than 8W/litre
although this can sometimes be reduced for very large tanks.
Ultrawave measure the power of our ultrasonic systems in RMS. This
gives the total power of the transducers. Some manufacturers
measure the ultrasonic power in “peak to peak” which doubles this
value so it is important to compare the same measurements
AG ultrasonic cleaning machine effectively and thoroughly clean all
types of Filter Cleaning
|Power supply||AC220V, AC 380V, 50/60 Hz, 3phase|
|Tank material||SUS304, 2mm thickness|
|Shell Material||SUS304, 1mm thickness|
|Others||With drainage, basket, lid|
|Warranty||1 year& tech support for life|